Neuropex ENT001, Руководство по эксплуатации

Страница: 12 / 20

Changing the Battery
When the indicator light on the front of the unit does not remain
lit once the unit is turned on, the battery should be replaced
with a newly charged battery.
1. Remove the panel cover by pressing the top and sliding
down until it is completely removed from the unit. This will
reveal the battery compartment.
2. Remove the discharged battery from the device.
3. Place new battery in compartment. Note the proper polarity
alignment indicated on the battery and the compartment.
Recharging Batteries
1. Take care to note the proper polarity of the battery. If
positioned properly, it will not be necessary to force the battery.
Caution: The battery may overheat and rupture if it is inserted
backwards.
2. Plug the charger and allow it to remain undisturbed for 8 to
10 hours. Remove battery upon completion.
3. Batteries should always be stored fully charged. After being
stored for 60 days or more, the Ni-Cad batteries may lose some
or most of their charge and should be charged prior to use.
CARING FOR YOUR TENS DEVICE
Your TENS device may be cleaned by wiping gently with a damp
cloth moistened with mild soap and water. Never immerse the
device in water or other liquids.
Wipe lead wires with a damp cloth as above if they become
soiled.
To properly store the TENS device for extended period of time,
remove the battery from the unit. Put the unit and accessories
in the carrying case and store in a cool dry location.
08