Neunaber Expanse Series, Руководство пользователя

Страница: 6 / 24

4
The ExP PORT connects to an (optional) ExP controller.
The FOOT SWITCH bypasses the effect. The LED lights when the effect is active.
Bypassing the effect does not lower power consumption, because it does not turn
off power to the pedal.
When using buffered bypass, the signal is always buffered whether the LED is on
or off. Trails bypass is implemented for those effects that support it (reverb and
echo).
Pedals that support true bypass have three selectable bypass options: (1) buffered
trails, (2) true bypass and (3) two-stage trails/true bypass.
Note: A knob change cannot be detected when the pedal is off. When the pedal
is powered on, it will revert to the stored state of the knob. When in doubt, turn the
knob, and it will “snap” to the current setting.
CONFIGURATION
Programming an Expanse pedal is a two-step process:
1. Load a different effect using Expanse software, downloadable from neunaber.net.
2. Configure the Mix Knob & Switch Behavior on the pedal itself.
These two steps are independent. For example, loading an echo effect does
not automatically enable the tap tempo functionality. This must be enabled by
configuring the Second Switch Function.