Neumo 66TX51341313131 Скачать руководство пользователя страница 49 | Manualshive

Страница: 49 / 92

background image

Container Cleaning System TANKO®EX-R64T

5 Installation

Translation - Operating/installation instructions 2020/03

41/80

WARNING

Risk of accidents due to incorrect installation!
Incorrect installation, falling components or failure to comply with the indicated safety
instructions can result in accidents or material damage.
There is a risk of minor or moderate injuries.



Only have experts perform work on the device.



Before starting work, observe the work steps of the switch-off procedure (see

Section

7.2 Switch-off Procedure



Wear protective work clothing, protective gloves and safety shoes for work.



Do not work on the device unless it is depressurized and cold.



Maintain a safe distance when working on the device. We recommend that you provide
1 m space for free movement around the device and container.

WARNING

Risk of falling when working at heights!
When carrying out assembly/disassembly work on parts of the plant at height, there is a
risk of falling.
There is a risk of death or severe physical injury.



Do not perform any work at height except with a safety cage or suitable fall protection
(e.g. safety rope and safety harness).



If you are using a harness for fall protection, it is essential that the rescue concept is
observed for a person in the harness.



A person must not remain suspended in the harness for longer than 15 min as there is
otherwise a risk of shock or even death.



Wear protective work clothing, safety shoes, protective gloves and a hard hat for work
at heights.

CAUTION

Danger due to freely rotating components on the device!
When grasping the device at the media connection or at one of the spray heads of the
attached devices, the device can suddenly and quickly turn due to the built-in ball
bearings until it reaches its center of gravity.
There is a risk of minor contusions.



When handling, e.g. unpacking, transportation without packaging,
assembly/disassembly and maintenance work, pay attention to the free rotation
possibility and grasp appropriately firmly, preferably at the distribution.



If necessary, provide free space for the rotary movement



Wear protective gloves when working on the device.

«
...
47
48
49
50
51
...
»

Содержание 66TX51341313131





























































































Отзывы:

Нет отзывов

Похожие инструкции для 66TX51341313131

Бренд: Odom Страницы: 19

Бренд: MacDon Страницы: 30

Бренд: Rain-Flo Irrigation Страницы: 20

Attest Auto-reader 390

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

Бренд: 3M Страницы: 2

PELTOR WS LiteCom Plus

Бренд: 3M Страницы: 7

Steri-Vac GS Series

Бренд: 3M Страницы: 52

Бренд: HANYOUNG NUX Страницы: 2

Бренд: Madsen Страницы: 206

Бренд: National Instruments Страницы: 10

Бренд: Park House Healthcare Страницы: 12

LSP400 LED Series

Бренд: WE-EF Страницы: 6

Бренд: A&D Страницы: 29

Бренд: Fagor Страницы: 12

Бренд: Baltic Страницы: 68

Бренд: H&S Страницы: 76

Бренд: Ultraflex Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды