Neumo 66TX51341313131 Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 92

background image

Container Cleaning System TANKO®EX-R64T

1 Introduction

Translation - Operating/installation instructions 2020/03

5/80

1.2

Warranty and Liability

The obligations agreed in the contract of supply and delivery, the general terms and conditions and the
terms of delivery of Armaturenwerk Hötensleben GmbH (referred to hereinafter as AWH) and the
statutory regulations valid at the time the contract was concluded shall apply.

Warranty and liability claims in case of personal injury and material damage shall be ruled out, in
particular if these can be attributed to one or more of the following causes:

–

improper or incorrect use of the device,

–

improper assembly and installation, start-up, operation and maintenance of the device,

–

failure to observe the notes in the instructions regarding assembly and installation, start-up,
operation and maintenance of the device,

–

constructional modifications to the device (conversions or other modifications to the device must not
be made without the previous written approval from AWH. In case of infringement, the device will
lose its EC conformity and the operating permit.),

–

use of spare parts that do not comply with the specified technical requirements,

–

improperly performed repairs,

–

disasters, the effects of foreign matter and force majeure.

Disclaimer

AWH reserves the right to make changes to this document at any time and without prior notice. AWH
provides no guarantee (neither explicitly nor implied) with regard to all information in this document,
including but not limited to the implied warranty of merchantability and suitability for a particular
purpose. Furthermore, AWH does not guarantee the correctness or completeness of information, text,
graphics or other parts in this document.

1.3

Product Names and Trademarks

The product names and trademarks included in these instructions are brands or registered trademarks
of the respective owners.

TANKO

®

and AWH

®

are registered trademarks of Armaturenwerk Hötensleben GmbH.

1.4

Related Documents

The following documents may contain additional information to these instructions:

–

Manufacturer's declarations and/or certificates of conformity

–

Certificates

–

Additional documents for any attached or upstream components, e.g. drawings, performance data,
information on accessories etc.

–

Additions to these instructions (e.g. special versions)

–

AWH catalog, product data sheet

«
...
11
12
13
14
15
...
»

Содержание 66TX51341313131





























































































Отзывы:

Нет отзывов

Похожие инструкции для 66TX51341313131

Бренд: ABB Страницы: 11

Бренд: DAKO Страницы: 25

Бренд: 3M ESPE Страницы: 50

Бренд: VACGEN Страницы: 13

Бренд: B-K lighting Страницы: 3

Бренд: CAB Страницы: 13

Бренд: CAB Страницы: 30

Бренд: CAB Страницы: 17

Бренд: CAB Страницы: 33

Camping Equipment

Бренд: C. Crane Страницы: 8

Бренд: C-Pro Direct Страницы: 4

Бренд: C-Pro Direct Страницы: 4

Бренд: p-light Страницы: 28

Бренд: Unitary products group Страницы: 28

Бренд: Haag-Streit Страницы: 16

Бренд: K-9 Lights Страницы: 12

Бренд: Olympus Страницы: 56

Бренд: Omlet Страницы: 60

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды