17
EN
Problem
▶
Possible causes
▶
Solution
The “VALID” LED blinks continu-
ously. (Blinking for a short period
during the synchronization process
is normal).
The microphone has not been
synchronized because the se-
lected word clock frequency is not
supported.
Select a word clock frequency that
it is supported by all of the con-
nected microphones.
The microphone supports only
“mode 1” in accordance with the
AES42 standard, i.e. it cannot be
synchronized.
Use a microphone that can be
synchronized (any Neumann Solu-
tion-D series microphones).
Functions cannot be controlled via
the user port.
Control via the user port has not
been activated.
In the RCS system menu, “Func-
tion controlled by user port”
must be activated for the relevant
functions.
Содержание DMI-8
Страница 18: ...18 Abb 1 Fig 1 Abb 2 Fig 2 ...
