Neumaerker 12-40424 DT, Руководство по эксплуатации

Страница: 13 / 18

Faulty devices or systems must not be put into operation!
Operate the device according to the operating instructions
(chapter 9). Use the operating instructions to explain to the
user how the device works and how to use it.
8.2 Assembly and installation
The device must be installed in such a way that the electrical connection is
accessible and maintenance can be carried out. The devices are not suitable for
incorporation.
If the appliance is installed near walls, partitions, kitchen furniture, ornamental edges,
etc., care must be taken that these materials are made of heat-resistant and non-
combustible materials, otherwise they must be covered with a suitable material, and
the surface must be heat-resistant and non-combustible material. Observe local fire
regulations.
The power cord must not come into contact with the hot parts. Observe the minimum
distance, see the installation plan chapter 7. Please notice the information on the
type plate before connecting!
Notice VDE regulations and regulations of the local power supply company!
The unit is delivered ready to plug in with a 1.5m long H07RN-F 3G connection cable
and can be connected to standard sockets.
Two separate sockets are required for double units; distributors and / or multiple
sockets must not be used. Make sure that the max. Power of the circuit is not
exceeded. Have this checked by a professional. An accessible, all-pole
disconnecting device with min. 3mm contact distance.
For technical data please refer to chapter 1.
8.3 Initial commissioning
During commissioning, greases and insulating materials can evaporate and lead to a
corresponding odor problem. Ensure adequate ventilation. Before use, remove the
protective film. If adhesive residues should remain, remove them with a suitable
solvent. Clean the unit with a soft cloth and mild detergent.
9. Operation
9.1 Security
Read this manual carefully, as it gives you important information on installation
safety, use and maintenance. Keep this manual for future reference. Consult an
Authorized Service Center for repairs and request the use of original spare parts.
Failure to observe the instructions given above may affect the safety of the
equipment and the user. Do not clean the appliance with a water jet! The unit is
intended for professional use and may only be used by qualified personnel.
9.2 Operating elements
see cover sheet and chapter 4.1.1 & 4.2