Neue CHT601FL, Руководство пользователя

Страница: 10 / 16

Problem Possible cause Remedy
and a number come on.
There is an error in the appliance. Disconnect the appliance from the
electrical supply for some time. Dis-
connect the fuse from the electrical
system of the house. Connect it
again. If comes on again, speak
to the service centre.
If you tried the above solutions and cannot repair the
problem, speak to your dealer or the customer service.
Give the data from the rating plate, three digit letter
code for the glass ceramic (it is in the corner of the
glass surface) and an error message that comes on. Make sure, you operated the appliance correctly. If not
the servicing by a customer service technician or dealer
will not be free of charge, also during the warranty peri-
od. The instructions about the customer service and
conditions of guarantee are in the guarantee booklet.
Installation
Warning! Refer to the Safety chapters.
Before the installation
Before the installation of the appliance, record the infor-
mation below from the rating plate. The rating plate is on
the bottom of the appliance casing.
• Model ...........................
• PNC .............................
• Serial number ....................
Built-in appliances
• Only use the built-in appliances after you assemble
the appliance into correct built-in units and work sur-
faces that align to the standards.
Connection cable
• Use the correct mains cable of type H05BB-F Tmax
90°C (or higher) for a single phase or two phase con-
nection.
• Replace the damaged mains cable with a special ca-
ble (type H05BB-F Tmax 90°C or higher). Speak to
your local Service Centre.
10