Neue CHT601FL, Руководство пользователя

Страница: 6 / 16

sensor field function
10
To activate and deactivate the outer ring.
Heat setting displays
Display Description
The cooking zone is deactivated.
-
The cooking zone operates.
There is a malfunction.
A cooking zone is still hot (residual heat).
Lock / The Child Safety Device operates.
The Automatic Switch Off operates.
Residual heat indicator
Warning! The risk of burns from residual heat!
Daily use
Warning! Refer to the Safety chapters.
Activation and deactivation
Touch for 1 second to activate or deactivate the ap-
pliance.
Automatic Switch Off
The function deactivates the appliance
automatically if:
• All cooking zones are deactivated ( ).
• You do not set the heat setting after you activate the
appliance.
• You spill something or put something on the control
panel for more than 10 seconds, (a pan, a cloth,
etc.). Remove the object or clean the control panel.
• You do not deactivate a cooking zone or change the
heat setting. After some time comes on and the
appliance deactivates. See below.
• The relation between heat setting and times of the
Automatic Switch Off function:
•
- — 6 hours
•
- — 5 hours
•
— 4 hours
•
- — 1.5 hours
The heat setting
Touch to increase the heat setting. Touch to de-
crease the heat setting. The display shows the heat set-
ting. Touch and at the same time to deactivate
the cooking zone.
Activation and deactivation of the outer rings
You can adjust the surface you cook to the dimension of
the cookware.
To activate the outer ring touch the sensor field /
. The indicator comes on.
Do the procedure again to deactivate the outer ring. The
indicator goes out.
Automatic Heat Up
You can get a necessary heat setting in a shorter time if
you activate the Automatic Heat Up function. This func-
tion sets the highest heat setting for some time (see the
diagram), and then decreases to the necessary heat
setting.
To start the Automatic Heat Up function the cooking
zone must be cold (no in the display). Touch of
the cooking zone again and again until the necessary
heat setting comes on. After 3 seconds comes on in
the display.
To stop the function, touch .
6