NetworX NX-1700E, Установка и запуск

Страница: 14 / 24

NX-1700E Card Reader
14
L
OCATION
248 P
ROGRAMMING THE
C
LOSING
T
IME FOR
S
CHEDULE
1
(2 segments of numerical data)
Segment 1 Program the hour of the closing time in 24-hour format. (Default is 20 = 8:00 PM)
Segment 2 Program the minutes after the hour of the closing time for Schedule 1. (Default is 0)
L
OCATION
249 P
ROGRAMMING THE
D
AYS FOR
S
CHEDULE
1
(1 segment of binary data)
LED1 = "On" if schedule is active on Sunday.
LED2 = "On" if schedule is active on Monday.
LED3 = "On" if schedule is active on Tuesday.
LED4 = "On" if schedule is active on Wednesday.
LED5 = “On” if schedule is active on Thursday.
LED6 = “On” if schedule is active on Friday.
LED7 = “On” if schedule is active on Saturday.
LED8 = “On” if schedule is disabled on holidays.
L
OCATIONS
250 - 270 P
ROGRAMMING THE
S
CHEDULES
2 - 8
Locations 250 - 270 are used to program the opening times, closing times, and days for Schedules 2 - 8. Each schedule
has three locations that are programmed with the same steps as Schedule 1 described previously. Refer to Schedule 1
(Locations 247 - 249 above) for specific instructions.
Location 250 – Opening Time for Schedule 2 Location 262 – Opening Time for Schedule 6
Location 251 – Closing Time for Schedule 2 Location 263 – Closing Time for Schedule 6
Location 252 – Days for Schedule 2 Location 264 – Days for Schedule 6
Location 253 – Opening Time for Schedule 3 Location 265 – Opening Time for Schedule 7
Location 254 – Closing Time for Schedule 3 Location 266 – Closing Time for Schedule 7
Location 255 – Days for Schedule 3 Location 267 – Days for Schedule 7
Location 256 – Opening Time for Schedule 4 Location 268 – Opening Time for Schedule 8
Location 257 – Closing Time for Schedule 4 Location 269 – Closing Time for Schedule 8
Location 258 – Days for Schedule 4 Location 270 – Days for Schedule 8
Location 259 – Opening Time for Schedule 5
Location 260 – Closing Time for Schedule 5
Location 261 – Days for Schedule 5
L
OCATION
271 P
ROGRAMMING THE
D
ATE OF
H
OLIDAYS IN
J
ANUARY
(8 segments of numerical data) Program the day of the month in January that the Opening time in a schedule is
suppressed. For example, if the opening should not occur on January 1, program a “1” in Segment 1. This feature can
be repeated up to a maximum of 8 holidays per location (month). (Default is No holidays)