network MR-TR-3G-D15 Series, Руководство пользователя

Страница: 10 / 20

MR-TR-3G-D Rev. 0
3.2 Optical power meter
By turning DIP#9 on, the LEDs can be used as an optical power meter. This is
practical under installation of the module. The power measurement is not accurate
but can be used as an indication of optical signal strength. Remember to turn this
function of after installation. When all LEDs are green the optical input power is
more than -6.5dBm. When all LED are off input power is below -25dBm.
Optical input power Status LED LOS/lock1 LED LOS/lock2 LED Laser fail LED
More than -6.5dBm Green Green Green Green
-7.0dBm to –8.5dBm Yellow Green Green Green
-9.0dBm to –10.5dBm Red Green Green Green
-11.0dBm to –12.5dBm Green Green Green
-13.0dBm to –14.5dBm Yellow Green Green
-15.0dBm to –16.5dBm Red Green Green
-17.0dBm to –18.0dBm Green Green
-18.5dBm to –19.0dBm Yellow Green
-19.5dBm to –20.0dBm Red Green
-21.0dBm to –22.0dBm Green
-23.0dBm to –24.0dBm Yellow
Below -25dBm Red
network-electronics.com | 10