MR-TR-3G-D
Rev.
0
2 Specifications
2.1 General
Power
+5V DC / 3W, +15V DC/1.5W
Control
Control system for access to setup and
module status with BITE (Built-In Test Equip.)
With standard ITU-T G.652 single mode fiber, we recommend to use the +5dBm DWDM
laser for distances longer than 60km for 3G-SDI.
2.2 General functions
Card labeling
Firmware upgrades
Card location in frame through blinking LED
The following parameters can be set and monitored via the web and SNMP interface:
Function Options
Laser
On or off
Electrical input
Normal or bypass
Telecom/data reclocker
Bitrate
Reclocker 1
Enable or bypass
Reclocker 2
Enable or bypass
The following parameters can be alarmed via the web and SNMP interface:
Voltage
+5V, +3.3V, +5V, +15V and +58V.
Reclocker
Loss of lock
2.3 Optical Input
Receiver type
Avalanche Photo Diode
Data rate optical
19.4 to 2970Mbps
Sensitivity
-
3G-SDI (2970Mbps)
Better than -25dBm,
-
HD-SDI (1485Mbps)
Better than –30dBm,
-
SDI (270Mbps)
Better than –30dBm,
-
SDH /SONET (2488Mbps)
Better than –25dBm,
network-electronics.com
|
5
