NTI VEEMUX VIDEO MATRIX SWITCH
39
TROUBLESHOOTING
Problem
Solution
No Video
-
Check power – power ON, power cable connected
-
Check video cabling – make sure cables are secured
-
Check connections – make sure you’re connected to an active input
SAFETY STATEMENTS
Grounding
These products have protective earth ground terminals and are built with full attention to consumer safety. There must be an un-
interruptible safety earth ground between the main power source and the product's power cord or supplied power cord set.
If ever the possibility exists for the grounding protection to have been reduced in any way, disconnect the power supply until the
grounding connection has been fully restored.
Servicing
NTI products are not intended to be serviced in the field and contain no user-serviceable parts. In the event repair is needed, all
servicing must be performed by factory trained and authorized service personnel. Only those items specifically identified in this
manual (if any) may be adjusted by the user of this product and adjusted only as instructed in this manual.
INDEX
address, 9
Autostatus, 10
bandwidth, 1
batteries, 32
baud rate, 9
Baud Rate, 8
cables, 2
change battery, 32
DDC, 33
desktop chassis, 1
Device Discovery Tool, 27
dwell time, 8
E
thernet connection, 5
firmware, 24, 34
front panel LCD, 7
fuses, 3
grounding, 39
infrared remote, 28
IP
address, 18, 20
IRT, 28, 29
Java, 27
LAN, 5
LED Matrix, 6
M
atrix Switcher's Control Program, 11
mounting in a rack, 37
p
assword, 2
resolution, 1
RS232 control, 5
RS232 Control, 8
S
can Mode-LCD, 8
S
canning Sequences, 22
Serial Address, 21
SERTEST, 11
servicing, 39
S
oftware control, 14
S
pecifications, 38
Stored Configurations, 20
Telnet Interface, 13
Telnet Interface-Port 2005, 14
Telnet password, 13
Telnet- Port 2000 Protocol, 13
Telnet-Port 2005 Protocol, 14
terminal, 5
unit address, 9
u
sername and password, 18
video sources, 4
web browsers, 1
W
eb Interface, 18
WARRANTY INFORMATION
The warranty period on this product (parts and labor) is two (2) years from the date of purchase. Please contact Network
Technologies Inc at
(800) 742-8324
(800-RGB-TECH) or
(330) 562-7070
or visit our website at
http://www.networktechinc.com
for information regarding repairs and/or returns. A return authorization number is required for all repairs/returns.
Man067 Rev 5/14/07
