NTI VEEMUX VIDEO MATRIX SWITCH
22
Output Names
From the Administration menu, the Output Names page can be
displayed. This page enables the Administrator to change the
names of the output ports displayed on the Switch page. To
change an Output Name, enter the name of the port for the
desired output port number, and press "Save".
Figure 13- Output Port Names
Outputs Scanning Sequences
Figure 14- Outputs Scanning Sequences page
The Outputs Scanning Sequences page displays the configuration of an automatic switching sequence from input (video source)
to input for each output (monitor).
The page displays:
output number being configured
the Scanning Sequence function status for that output
the Scan Mode status of each input (ON/OFF)
the length of time in seconds (dwell time) that each input will be viewed when connected
