background image

NTI AUDIO/HD VIDEO MATRIX SWITCH 

 

22

 

Web Interface 

 

A user may control the connections of the VEEMUX-A using a Web Interface via any web browser (see page 1 for web supported 
browsers).  With the VEEMUX-A connected to a LAN through an Ethernet cable, a user can access the web interface controls 
inside the VEEMUX-A.    
 

FYI: To quickly locate a VEEMUX-A on the LAN and edit the IP address settings,  use the Device Discovery Tool  (page 
31).

 

 
To access the web interface, type the current IP address into the address bar of the web browser.  
Address     
 
To open an SSL-encrypted connection, type: 
Address   
 
You will be prompted to accept a certificate.   Accept the NTI certificate.    
 
A "Welcome Page" will appear.   
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  

                                                            Figure 8- Web interface  Welcome page 

 

Enter the Password 

 
Click on a link to the left to be prompted for a username and password.     To change the password, see page 30.  
 
 

User Name =

 

Administrator

 (upper case letter for "A" only) 

Password = admin

 (lower case letters only) 

 

 
 

Note:   The browser must be configured 
to accept cookies in order for the user to 
successfully make use of the web 
interface. 

 
 
 
 
 
 
 

                                                     Figure 9- Web interface Login Prompt 

 
As described on the following pages, each link will enable different areas of control for the VEEMUX-A.   

 

http://192.168.1.30 

https://192.168.1.30 

Содержание VEEMUX SM-8X4-HDA
















































Отзывы: