3
Additional Features
•
Users can work individually or share the same CPU.
•
Up
to
n
users can work with
m
CPUs where
n
and
m
are the switch size acquired.
•
High density (similar to SCSI) input and output ports that interface cables plug into adapt to PS/2 and SUN platform devices.
•
Power cycle circuit control allows the NTI switch to be powered OFF, then ON, at any time without affecting the attached
CPUs.
•
Power cycle circuit control allows the attached CPUs to be powered OFF, then ON, at any time without affecting the switch or
other attached CPU.
•
OSD enabled system with security features optionally enabled on a port by port basis.
•
A microprocessor is dedicated to each CPU, preventing connected CPUs from locking up.
•
Each connected CPU can boot without a keyboard or mouse.
•
Keyboard and mouse interface cable can be hot-plugged during operation.
•
LCD display on the front panel shows the CPU to which each user is connected.
•
10 connection setups can be saved in memory by the user for instant setup recall.
•
No dip switches or jumpers necessary to configure.
•
Video formats up to 1900X1200 can be displayed from all platforms. (A VGA multi-scan monitor must be used)
•
User’s keyboard and mouse can control the switch using the On Screen Display (OSD) of each user’s connections :
•
Names can be assigned to the CPUs
•
Password security on a port-enabled basis.
•
RS-232 control allows control of the switch with one CPU serial port.
•
Power required is 110 or 220 VAC @ 50-60 Hz at less than 50 watts.
•
ST-MX multi-console adapter is compatible for system expansion.
