background image

Introduction 

The XTENDEX

®

 

4K 10.2Gbps HDMI USB KVM Extender via CAT6/7 or Fiber provides remote KVM (USB keyboard, 

USB mouse and 4Kx2K 30Hz UHD HDMI monitor) access to a USB computer up to 328 feet (100 meters) away via 
CAT6/6a/7 cable, 6.21 miles (10 km) via simplex LC single-mode fiber optic cable, or 984 feet (300 m) via simplex 
LC multimode fiber optic cable. 

Each KVM extender consists of a local unit that connects to a computer, and a remote unit that connects to an HDMI 
monitor, bi-directional 3.5mm stereo audio speakers and microphone, RS232, and up to four USB devices (keyboard, 
mouse, flash drive, HDD, or touchscreen display). 

Features: 

Supports Ultra-HD 4Kx2K resolutions to 3840x2160 and 4096x2160 @30Hz YUV 4:4:4, HDTV resolutions to

1080p, and up to 1920x1200 (WUXGA). 

Signal transmission via one CAT6/6a/7 cable or one single-strand single-mode/multimode LC fiber optic cable.

o

Using CAT6/6a/7 cable:

 

Extend a 4Kx2K signal up to 328 feet (100 meters).

 

Extend a 1080p or 1920x1200 signal up to 492 feet (150 meters).

 

Use with a Gigabit switch to extend a total distance of 656 feet (200 meters) between the
transmitter and receiver – the transmitter and receiver can each be extended 328 feet (100
meters) from the switch.

o

Using single-mode 9-micron cable, extend to 6.21 miles (10 km).

o

Using multimode 50-micron cable, extend to 984 feet (300 meters).

HDMI features supported:

o

HDMI 1.4

o

36-bit Deep Color

o

RGB, YCbCr 4:4:4, YCbCr 4:2:2

o

Dolby, DTS, Stereo, and LPCM

o

Bandwidth up to 340 MHz (10.2 Gbps)

HDCP 1.4 compliant.

Four USB 2.0 ports for keyboard, mouse, flash drive, HDD or touchscreen display.

o

Keyboard and mouse are hot-pluggable.

Supports Plug-and-Play specification.

Using an unmanaged Gigabit network switch, extend up to 32 pairs in Point-to-Point connections.

o

Use the DIP switch on the transmitter and receiver to specify the ID for the unit.

 

Transmitter and receiver units with the same ID will connect to each other. (Only Point-to-Point

connections are supported.) 

Supports full-duplex RS232 up to 115200 baud.

EDID pass-through for the support of any HDMI display device.

Mounting brackets included for easy surface/wall mounting.

Materials Included

 

  

Local Unit Package:

 

o 1 x Local Unit
o 1 x Power Supply
o 1 x Mounting Rack Metal Parts

    

Remote Unit Package:

 

o 1 x Remote Unit
o 1 x Power Supply
o 1 x Mounting Rack Metal Parts

Содержание ST-C6FOUSB4K-LC







Отзывы: