4
System Installation
1.
Attach a display, keyboard/mouse, microphone and speaker, as required, to
the
HDMI-Out, USB, MIC-IN, Line-Out ports of the
ZĞĐĞŝǀĞƌ
respectively.
2.
Use a HDMI-HDMI cable to attach the PC HDMI output to the HDMI-IN of the
dƌĂŶƐŵŝƚƚĞƌ
.
3.
Use a USB-B to USB-A cable to connect
dƌĂŶƐŵŝƚƚĞƌ
USB-B to PC USB port.
4.
Connect the
dƌĂŶƐŵŝƚƚĞƌ
’s Line-In/Line-Out to PC Line-Out/Line-In
ƵƐŝŶŐ
audio cables.
5.
5.1 For
ddž
cable installation: Use a CAT6
ͬϲĂͬϳ
UTP cable (straight EIA 568B, max.
1
ϱ
0
meters depending on cable quality) to directly connect
ddž
to
Zdž
as a
pair
connection, or 100
ŵĞƚĞƌƐ;ĞĂĐŚͿ
to
Ă
Gigabit Ethernet Switch.
5.2 For Fiber cable installation:
ŽŶŶĞĐƚ
&ŝďĞƌĐĂďůĞ;ĞŝƚŚĞƌ^D;ƵƉƚŽϭϬŬŵͿŽƌDD
;ƵƉƚŽϯϬϬŵͿͿ
ƚŽƚŚĞƉƌĞͲĂƚƚĂĐŚĞĚ
1.25G SFP module
ŽĨ
the Tx/Rx SFP Fiber Slot
ĨŽƌ
ĚŝƌĞĐƚ
Tx/Rx
ĐŽŶŶĞĐƚŝŽŶ
, or connect to Gigabit Ethernet Switch,
6.
Adjust the Tx/Rx 5-bit DIP Switch to match as a pair
ĞĚ
connection.
7.
Power ON both the
ZĞĐĞŝǀĞƌ
and the T
ƌĂŶƐŵŝƚƚĞƌ
.
8.
The EDID of Rx screen will be detected by the PC Graphic card. The PC HDMI/Audio
outputs will be displayed on the
ZĞĐĞŝǀĞƌ
’s monitor and speakers. The EDID info
should be available on the PC graphic control panel.
9.
The USB keyboard/mouse at the R
ĞĐĞŝǀĞƌ
will now control the PC at
ƚŚĞdƌĂŶƐŵŝƚƚĞƌ
.
tŚĞŶŵƵůƚŝƉůĞdƌĂŶƐŵŝƚƚĞƌƐĂŶĚZĞĐĞŝǀĞƌƐĂƌĞĐŽŶŶĞĐƚĞĚƚŽĂŶĞƚǁŽƌŬƐǁŝƚĐŚ͕ĞĂĐŚƉĂŝƌ
ŵƵƐƚŚĂǀĞĂƐĞƉĂƌĂƚĞ/ŶƵŵďĞƌ͕ĚĞƚĞƌŵŝŶĞĚďLJƚŚĞƉŽƐŝƚŝŽŶŽĨƚŚĞĚŝƉƐǁŝƚĐŚĞƐŽŶƚŚĞ
ĨƌŽŶƚŽĨƚŚĞdƌĂŶƐŵŝƚƚĞƌĂŶĚZĞĐĞŝǀĞƌ͘dƌĂŶƐŵŝƚƚĞƌĂŶZĞĐĞŝǀĞƌĐĂŶŽŶůLJĐŽŶŶĞĐƚƚŽĞĂĐŚ
ŽƚŚĞƌ;ƉĂŝƌͿŝĨƚŚĞŝƌ/ŶƵŵďĞƌƐĂƌĞƚŚĞƐĂŵĞ͕ĂŶĚƚŚĞLJŵƵƐƚďĞƵŶůŝŬĞĂŶLJŽƚŚĞƌ/
ŶƵŵďĞƌƐŽŶŽƚŚĞƌdƌĂŶƐŵŝƚƚĞƌƐĂŶĚZĞĐĞŝǀĞƌƐĐŽŶŶĞĐƚĞĚƚŽƚŚĞŶĞƚǁŽƌŬƐǁŝƚĐŚ͘dŚĂƚŝƐ͕
ĞĂĐŚƉĂŝƌŽĨdƌĂŶƐŵŝƚƚĞƌĂŶĚZĞĐĞŝǀĞƌŵƵƐƚŚĂǀĞĂƵŶŝƋƵĞ/ŶƵŵďĞƌ͘
,'
,'
,'
