netvox Z311C, Руководство пользователя

Страница: 7 / 14

7
5.3. Enroll in the ZigBee Security System
Z311C is a Zone device in the ZigBee security system. Right after Z311C join the ZigBee network, it will
automatically find out a CIE (Control and Indicating Equipment) device (i.e. Netvox Z201B) and send a
registration request to the CIE device to enroll in the security system. The enrollment has these 3 situations:
A. There is no CIE device or no compatible CIE device in the network → the indicator flashes red twice .
B. There is a compatible CIE device in the network, but it is failed to enroll → the indicator flashes red 4
times . Users can press the Auxiliary Key to initiate the registration.
C. The enrollment is completed → the indicator flashes red 6 times .
NOTE: Users had better NOT enroll multiple Zone devices at the same time to prevent registration failure.
5.4. Sleeping Mode
Z311C is designed to go into sleeping mode for power-saving in some situations:
A. When it doesn’t find a network to join → Z311C will go to sleeping mode.
B. While the device is in the network → the sleeping period is 5 minutes; it will wake up every 5
minutes to keep online.
C. Once Z311C was joined to a network and by any chance the network is no longer existed or the
device is out of the network → Z311C will wake up every 15 minutes to find the network it joined
before. It never keeps in sleeping mode and continues to find its network every 15 minutes. This
condition would consume up to 30 times power spending compared to normal-operating status. To
prevent this unwanted power consumption, we recommend that users manually power off the device.
5.5. Wake up Z311C
When users would like to setup or acquire data from the device which is in sleeping mode, we have to wake
up the device as the following steps:
Step1. Press and hold both the Auxiliary Key and the Binding Key .
Step2. After the indicator flashes red twice , release both buttons.
Step3. The indicator will flash green 5 times while broadcasting the IP address and the IEEE address.
Z311C would be in active status for 2 minutes for communication.
5-6. Door Window Contact Sensor
 Z311C’s Zone Type: Contact switch (ID: 0x0015)
 The value of Alarm1 is 1 when the door/window is opened (the distance between the magnet and the
contact is more than 22cm).
 The value of Alarm1 is 0 when the door/window is closed.