netvox Z311C, Руководство пользователя

Страница: 6 / 14

6
5. Setting up Z311C
5.1. Turn On/ Turn Off Z311C
Under the circumstances Z311C is first time used or after resetting, when it is powered on and cannot
successfully search a network, Z311C will go into
turn-off mode . Turn-off mode ensures the minimum power
consumption. Under this mode, any other buttons and contacts are not active except the binding key.
When Z311C had previously joined a ZigBee network, Z311C will go to turn-on mode and is ready to work in
the network after powering on it.
Users can also manually turn on or turn off Z311C using the following instructions:
A. Turn it on: Press the Binding Key once. The indicator will flash red once , and the device is ready to
be used.
B. Turn it off: Press the Binding Key once. The indicator will flash red 10 times in 5 seconds. Press the
Binding Key again within the 10 red flashes to turn the device off. Otherwise, while the key press is
not applied within 5 seconds, the device will be still in turn-on mode.
NOTE: We recommend that users remove the battery to power off Z311C when it is not indented to be used
for a long period of time.
5.2. Join the ZigBee Network
After Z311C is powered on, it will search for an existing ZigBee network and send a request to join the
network automatically. While Z311C is under the coverage from a coordinator or a router whose
permit-join
feature is enabled , Z311C will be permitted to join the network. Typically, the default permit-join period of
time is 60 seconds. Please refer to the following steps to complete the join:
Step1. Restore Z311C back to the default factory setting (please refer to Chapter 5.9. Restore To Factory
Setting ).
Step2. Enable the permit-join function (valid for 60 seconds) of a coordinator or a router (please refer to
the user manual of the coordinator or the router to enable the permit-join feature).
Step3. Turn on Z311C. It will start to search and join the network.
The indicator will flash green 5 times after it is joined successfully. Otherwise, the indicator will not flash.
Z311C will stop searching and go to turn-off mode when it doesn’t find a network to join in 15 seconds. Press
the
Binding Key again to turn it on for searching and joining the network.
 After joining a network, Z311C would try to enroll in the ZigBee security system. Please make sure
Z311C and CIE (Control and Indicating Equipment) device have enough power.