9
Example#3
based on MinTime = 15 Minutes, MaxTime= 1 Hour, Reportable Change i.e. BatteryVoltageChange= 0.1V.
sleeping
sleeping
...
0H
15
th
M
30
th
M
45
th
M 1H
1H 10
th
M
1H 25
th
M 1H 40
th
M 1H 55
th
M
2H 10
th
M
Notes
1)
The device only wakes up and performs data sampling according to MinTime Interval. When it is sleeping, it does not
collect data.
2)
The data collected is compared with the last data reported. If the data variation is greater than the ReportableChange value,
the device reports according to MinTime interval. If the data variation is not greater than the last data reported, the device
reports according to MaxTime interval.
3)
We do not recommend to set the MinTime Interval value too low. If the MinTime Interval is too low, the device wakes up
frequently and the battery will be drained soon.
4)
Whenever the device sends a report, no matter resulting from data variation, button pushed or MaxTime interval, another
cycle of MinTime/MaxTime calculation is started.
6. Installation
This product has waterproof function.
Installation method of toilet water tank leakage detection equipment:
Step1. Open the toilet water tank cover.
Step 2. Press the handle gently to drain water until the toilet begins to replenish water. Record the water level at this time,
namely the make-up water level.
Step 3. When the water supplement stops, record the current water level, that is, the full water level.
Step 4. Use a ruler to measure the middle position from the water tank cover to the full water level and the make-up water
level.
Step 5. Reduce the length of the probe according to the measured value, so that the end of the probe is in the middle of the
make-up water level and the full water level.
Step 6. Lock R720FLT on the bracket and hang it on the water tank wall.
Step 7. Close the upper cover of the toilet water tank to complete the installation.
Wakes up and
collects data
REPORTS 3.6V
Wakes up and collects data
3.5V |3.5-3.6|=0.1
REPORTS 3.5V
Wakes up and
collects data
3.5V
Does not report
Wakes up and
collects data
3.5V
Does not report
Wakes up and
collects data
3.5V
Does not
report
Wakes up and
collects data 3.5V
Does not report
Wakes up and
collects data
3.5V
Does not report
Wakes up and
collects data
REPORTS 3.5V
Wakes up and
collects data
3.6V
Does not report
Users push the
button,
REPORTS 3.5V.
MaxTime
