8
Note:
1.
The probe contains sensitive optical and electronic components. Make sure that the probe is not subject to severe mechanical
shocks. There are no parts inside the probe that need users’ maintenance.
2.
The black plastic cap on the head of the turbidity sensor should be removed during the test; otherwise, it will affect the
measurement.
Maintenance Method
1.
External Surface of The Sensor:
Use tap water to clean the external surface of the sensor. If there are still debris remaining, wipe it with a moistened soft cloth.
For some stubborn dirt, users can add some household detergent to the tap water to clean it.
2.
Check the Cable of The Sensor:
The cable should not be taut during normal operation; otherwise, the internal wires of the cable may break and the sensor
cannot work normally.
3.
Check whether the measuring part of the sensor is dirty, and whether the cleaning brush is normal.
