7
6.
Installation
1. R718PA10 has the built-in magnet (as the figure below)
which can be attached to the surface of an iron object
during installation, which is convenient and quick.
In order to make the installation firmer, please use screws
(purchased separately) to fix the device to the wall or other
surface (as Figure below).
Note:
Do not install the device in a metal shielded box or in an
environment surrounded by other electrical equipment to
avoid affecting the wireless transmission of the device.
2. R718PA10 regularly reports the data of the turbidity value
and the temperature of the solution according to MaxTime.
The default Max Time is 3 minutes.
Note:
MaxTime can be modified by the downlink command, but it
is recommended not to set the interval too short.
R718PA10 can be applied to detecting the turbidity and the
temperature of the solution.
Example:
⚫
Water Quality Monitor
Screw
Fixation
Screw
Fixation
Turbidity Sensor
R718PA10
Socket
Adapter 12V
