netvox R311LA, Руководство пользователя

Страница: 7 / 17

6
5. Data Report
After the device is powered, it will immediately send a version package and an attribute report data
that reports the current status of the object and the raw data of infrared range.
The device sends data according to the default configuration before any other configuring.
Default Setting
Maximum time: 3600s
Minimum time: 3600s (By default, the current is detected every MinTime.)
Battery: 0x01 (0.1V)
OnDistanceThreshold :0xC409 little-endian (2500)
* Distance Threshold value is used little-endian;
When you need configure distance threshold default setting, please change to little-endian,
for example 2500(Hex) =9C4(Dec) is big-endian and 0xC409 is little-endian
Note:
1. The cycle of the device sending the data report is according to the default.
2. The interval between two reports must be the MinTime.
3. If there are special customized shipments, the settings will be changed according to customer’s
requirement.
The device reported data parsing please refer to
Netvox LoraWAN Application Command document and Netvox Lora Command Resolver
http://loraresolver.netvoxcloud.com:8888/page/index