NetUP Streamer HDMI 8x. User manual
14
WEB NMS Operation
In addition to the buttons on the front panel, you can use the web interface to control NetUP
Streamer HDMI 8x.
Login
Connect a personal computer and the device with net cable, and use ping command to confirm they
are on the same network segment.
Make sure that the computer’s IP address is different from the device’s IP address;
otherwise, it would cause an IP conflict
The default IP address of NetUP Streamer HDMI 8x is
192.168.0.136
. Thus, set the computer’s IP
address to 192.168.0.X, where X can be from 0 to 255, except 136. Open a web browser, enter the
device’s IP address in the browser address bar and press
Enter
. If the network is configured correctly,
you will see the login interface (Figure 1).
Enter username and password and click
LOGIN
to enter the web interface. Default username is
“admin”, default password is “admin”.
Figure-1
