background image

alu rehab aS_bedriftsveien 23_NO-4353 Klepp stasjon_Norway_Tel. +47 51 78 62 47 51 78 62 21_www.alurehab.com

Arm Supports:

Check that the lock track is cleaned and oiled with silicon spray. en-
sure that the position screw is mounted and in the correct position. 
Check that the arm support pads are mounted with two screws on 
each side, check the screws are tight. Place the arm support in the 
cleaned arm support bracket, move the arm support pads forwards 
and rearwards slowly while screwing the lock screw inwards.  When
play in the arm supports has been removed, tighten the nut.

Arm Support Netti 4U CED:

ensure that the lock and release mechanism works. Check depth/
length displacement of the arm support pads, tighten the screw in 
the arm support pads.

Back Rest unit:

 

Check velcro back for damage in sewing and lock. If necessary clean 
the velcro. Tighten the straps. Clean the cushions in accordance with 
label instructions.

Push Handles :

Check the push handles for wear 
and damage, replace the hand-
grips if necessary. ensure that 
the security screw is fitted. 
Check that the shelter studding 
in the plastic bracket is not de
formed.

Push bow: 
Check all screws and fastening points. remove loose screws, 
clean with methylated spirit and re-fit using Thread lock glue, 
(full locking). Check that the tilt and back release handles are 
marked with correct symbols. replace adjusting handles and 
wheels if necessary. 

If the cleaning routine has not been followed and driv-
ing handles/hand grips have been incorrectly cleaned, 
replace with new.

Head support: 

Check the head support is clean and that there are no abrasions 
or tears. replace the head support if the wheelchair is for a 
new user. Oil screws and wheels. Check and replace handles and 
wheels if necessary.

6

alu rehab aS_bedriftsveien 23_NO-4353 Klepp stasjon_Norway_Tel. +47 51 78 62 47 51 78 62 21_www.alurehab.com

Pr

epar
ation pr

ocedur

e

Arm 

support

pads

Arm

support

bracket

Position

screw

Adjustable

drawback

Lock

groove

Depth shift

lock

Release mechanism

Grip

Security screw

Push bow

Push bow

Back rest

cushion

Velco back

Push bow

Head support bracket

Position lock

Position lock

Velcro back

Release handle

Push bow Netti 4U comfort|CED

Adjust handle

Содержание 4U comfort/CED













Отзывы: