Netti 4U comfort/CED, Руководство пользователя

Страница: 5 / 12

5
alu rehab aS_bedriftsveien 23_NO-4353 Klepp stasjon_Norway_Tel. +47 51 78 62 47 51 78 62 21_www.alurehab.com
Preparation procedure
before working on the wheelchair it is advisable to place the wheelchair on a raised table
or bench giving a comfortable and correct position and avoiding any unnecessary lift. use
recomended tools and refer to the user Manual.
Clean the Wheelchair - see Cleaning Procedure - Page 4, difficult stains remaining after the
cleaning process can be removed with methylated spirit.
For Oiling or Greasing - remove cushions, head support, foot supports, main wheels, front
castors, arm supports and any other accessories, and tilt the wheelchair rearwards on to
the anti tip tubes.
Frame :
Check the frame for deformations, breakages, damage, abrasions, and missing screws, bolts
and nuts, worn parts must be replaced, and oiled if necessary.
Main Wheel:
Main wheels and push rims can be cleaned with soapy
water or methylated spirit. Clean the rims and check
tyres for damage and cracks, replace if necessary. Oil
the quick release/main wheel axle, check that the quick
release locks the main wheel when mounted on the
Wheelchair. To check that the main wheel is properly
attached to the wheel hub release finger pressure from
the end button and pull the main wheel.
Front Castors and Front Forks:
Clean the front forks with methylated spirit, oil the
quick release axle and check for play. If there is play in
the quick release axle, remove, clean with methylated
spirit and apply Thread lock glue to secure the front
fork within the bearing house. For correct manoeuver-
ing check that the bearing house is mounted vertical
in relation to the ground (see user Manual for further
details).
Dismantle the front castors from the front forks for
cleaning with methylated spirit and check for play in
the bearing. replace the front castors if worn. Check
that the quick release locks the front castor when
mounted on the wheelchair (see user Manual for futher
details).
5
Pr
epar
ation pr
ocedur
e
alu rehab aS_bedriftsveien 23_NO-4353 Klepp stasjon_Norway_Tel. +47 51 78 62 47 51 78 62 21_www.alurehab.com
Push ring
Quick release
Main wheel
Bearing
house
Bearing house
Eccentric bolt
Front fork
Ball race
Quick release
Wheel axle
Front castors