6
My-Netti.com
Model:
Netti Side supports
Language:
English
Version:
2022-02
2.3 MOUNTING INSTRUCTION
FOR NETTI SIDE SUPPORT BASIC- FITTING FOR:
NETTI WHEELCHAIRS WITH ROUND BACK TUBE
Netti 4U BASE
Item number 88468
The side support Basic is height, width and depth
adjustable.
Open the clamp
4 mm Allen key
Place the 2 clamp half’s around the back tube
of the wheelchair.
Keep all screws loose (to be tightened after
fitting with side support)
Position the clamp in the area shown on the right.
Adjust the clamp at the desired height and tighten
the screws so that the clamp can be positioned later.
Turn the Italian grip to open the horizontal hole in
the clamp.
You may also need to unscrew the grub screw
on the bottom of the clamp by using
3mm Allen key
Screws on side support clamp kit 88295
should be tightened enough to avoid
rotation of side support when this side
support is fitted on the back tube round
Insert the side support to the clamp and turn the
lever clockwise to fix the side support in the clamp -
see illustration on top of this page.
