9
Model:
Netti Side supports
Language:
English
Version:
2022-02
My-Netti.com
After fitting the backrest cushion:
•
Find the correct height for the side support.
The support should be parallel with the
integrated side support of the backrest
cushion.
•
If the Velcro back has a cut-out for the side
support, place the side support there.
•
If there is no opening in the Velcro back, cut a
piece of the Velcro backrest to give room for
the clamp to fit around the backrest tube at
desired height.
•
When mounting on a square tube, place the
enclosed plastic bushing around the backrest
tube before fixing the clamp around the
tubing.
•
Mount the clamp and tighten the 6 mm
screws firmly.
Before the screws are tightened, you can choose the
angle of the clamp and thereby increase or decrease
the stability.
To release the side support and swing it outward,
pull the release button out.