NV-202P Long Reach Ethernet Extender with PoE User’s Manual Ver. A4
16
3.2 Front Indicators
The bridge has
Eight
LED indicators. The following Table shows the description. (
Table 3-2
)
Table 3-2
LED Indicators Description and Operation
LED
Color
Status
Descriptions
On(Steady)
Lights to indicate that the VDSL2 bridge had power
PWR
(Power LED)
Green
Off
The device is not ready or has malfunctioned.
On(Steady)
The device has a good Ethernet connection.
Blinking
The device is sending or receiving data.
LAN 1-2
(Ethernet LED)
Green
Off
The LAN is not connected.
On(Steady)
The device has a good PoE connection.
Blinking
The device is detected to a PoE device, but the power supply does not
feeding to the PD.
PoE 1-2
(PoE LED)
Green
Off
The device is not connected to a PD device yet.
CO (Local Side)
(CO LED)
Green
On(Steady)
Indicate the VDSL2 bridge is running at
CO(Master)
mode.
CPE (Remote Side)
(CPE LED)
Green
On(Steady)
Indicate the VDSL2 bridge is running at
CPE(Slave)
mode.
On(Steady)
The Internet or network connection is up.
Blinking slowly
The CO device is auto-detecting CPE device.
Blinking fastly
1. The CO device has detected a CPE device and ready to connect.
2. The device is sending or receiving data.
LINE
(VDSL LINK LED)
Green
Off
The Internet or network connection is down or has malfunctioned.
