NV-202P Long Reach Ethernet Extender with PoE User’s Manual Ver. A4
10
2.5 Connecting the RJ-11 / RJ-45 Ports
The line port has 2 connectors: RJ-45 and terminal block. It is used to connect from NV-202P (CO) using single pair phone cable
to NV-202 (CPE) side (point to point solution). Take note that NV-202P line port cannot be used at the same time. Either RJ-11
port is connected or terminal block is connected using straight connection (
Figure 2.4
) or cross-over connection (
Figure 2.5
)
Figure 2.4
NV-202P line ports straight connection
Figure 2.5
NV-202P line ports crossover connection
When inserting a RJ-11 plug, make sure the tab on the plug clicks into position to ensure that it is properly seated.
Do not
plug a RJ-11 phone jack connector into the Ethernet port (RJ-45 port). This may damage the bridge. Instead, use only
twisted-pair cables with RJ-45 connectors that conform to Ethernet standard.
