SIP 60X User Manual
Page 16 of 43
in round robin fashion.
Example Configuration of a typical Hunting Group:
1. Configure the SIP account from your VoIP Service Provider on
FXS port 1
under
FXS
Ports
webpage.
2. Select
Active
under the
Hunting Group
drop box for FXS port 1.
3. For the remaining ports (say 2, 3 and 4) select
1
for
Hunting Group
. Ports 2, 3 and 4
are now active members of the hunting group associated with port 1.
This configuration will route all calls directed to FXS port 1 to ports 2, 3 and/or 4 in round
robin fashion respectively
if
port 1 is busy. You can configure the ring timeout on the
Profile
page.
Example configuration of a multiple hunt group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #2: SIP UserID and Authenticate ID left blank, Hunting Group set to "
1
"
FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "
1
"
FXS Port #4: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "
4
"
FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "
4
"
FXS Port #7: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "
7
"
Hunt Group 1 contains ports 1, 2, 3. Hunt Group 4 contains ports 4, 5, 6. Hunt Group 7
contains ports 7, 8.
Please be aware, the choice of 1 for ports 2 and 3, the choice of 4 for ports 5 and 6, the
choice 7 for port 8 is required to indicate that the SIP account tied to port market as
“Active”
will be used for all members of the same Hunting group. Needless to say, those
members of the same Hunting group may not be sequential ports. In following example
ports 3, 5 and 7 tied to SIP Account configured in Port #1 marked as
“Active”
, and ports
4,6,8 tied to SIP Account configured in Port #2 marked as
“Active”
as well.
Example of not sequential configuration of a multiple hunt group:
FXS Port #1: SIP UserID and Authenticate ID entered, Hunting group set to "
Active
"
FXS Port #2: SIP UserID and Authenticate ID entered, Hunting Group set to "
Active
"
FXS Port #3: SIP UserID and Authenticate ID left blank, Hunting Group set to "
1
"
FXS Port #4: SIP UserID and Authenticate ID left blank, Hunting group set to "
2
"
FXS Port #5: SIP UserID and Authenticate ID left blank, Hunting Group set to "
1
"
FXS Port #6: SIP UserID and Authenticate ID left blank, Hunting Group set to "
2
"
FXS Port #7: SIP UserID and Authenticate ID left blank, Hunting group set to "
1
"
FXS Port #8: SIP UserID and Authenticate ID left blank, Hunting Group set to "
2
"
Note:
A single call directed to the SIP account will NOT result in all ports ringing at the
same time. They will ring in the hunting group only. This feature is applicable to incoming
calls only.
Содержание SIP 60X
Страница 1: ...User Manual SIP 60X Analog IP Gateway 4 or 8 FXS Ports...
Страница 39: ...SIP 60X User Manual Page 39 of 43...
