User Guide
User Guide
4-15
6)
Click OK to close the
Internet Protocol (TCP/IP) Properties
window.
7)
Click
Close
(
OK
in Window 98/ME/2000) to close the
Local Area Connection
Properties
window.
8)
Close the Network Connections screen.
9)
Launch your web browser and enter “192.168.1.200” at the address bar and hit Enter.
4.1.2
Accessing GUI Using Hub/Switch
Figure 4.2: Accessing GUI Using Hub/Switch
If your Router’s LAN is already in the192.168.1.XXX subnet, simply launch your web browser
and enter “192.168.1.200” (VOIP ATA’s Static IP) at the address bar and hit
Enter
.
If you Router’s LAN is using subnet other than 192.168.1.XXX:
Steps:
1)
Access the VOIP ATA’s GUI using Static IP (Refer to 3.2.1) and set the VOIP ATA as a
DHCP client.
2)
Access Router’s GUI.
3)
Find out the IP Address, which have been assigned to VOIP ATA.
Tip!
Use VOIP ATA’s MAC Address as a reference.
Содержание Network Adapater
