Netkrom W24-AP11H, Руководство пользователя

Страница: 33 / 40

-29-
Chapter 4 Troubleshooting
If you have trouble using the 11Mbps Wireless LAN Inter-Building Access Point, the starting
point to troubleshoot the problem with your Inter-Building Access Point is looking at the LED
activity of the Inter-Building Access Point. The following is “LED Error Table” provided to
assist you in diagnosing and solving operational problems.
PWR AP WLAN LAN LINK Description/Action
Steady
Green
Continuous
Green
Flash
Green
Flash
Green
-
Normal operation where flickering
indicates interface activity.
n No action required.
Continuous
Green
On Off Off -
Normal operation that indicates
there is no LAN activity.
n No action required.
Off Off Off Off Off
Power failure.
n Check the power cord.
n Check the power supply.
Off Off Off Off
Invalid loader firmware or the Inter-
Building-controller is dead.
n
Return the unit to the vendor
for support.
Blink Green - - -
Invalid Inter-Building Access Point
firmware.
n Upgrade the firmware via the
utility or console mode.
Blink Green
Blink
Green
- -
Wireless LAN initialization failure
n Check whether the wireless
module has been properly
installed.
Continuous
Green
Blink Green -
Blink
Green
-
Ethernet initialization failure
n Return the device to the vendor
for support.