Netkrom W24-AP11H, Руководство пользователя

Страница: 10 / 40

-6-
2-4 Hardware Installation
Take the following steps to set up your Inter-Building Access Point.
n Site Selection
Before installation, determine the Inter-Building Access Point location. Proper placement
of the Inter-Building Access Point is critical to ensure optimum radio range and
performance. You may use the Site Survey and Access Points Browser utility (The
utilities came with the wireless PC Card) to choose a proper placement for your Inter-
Building Access Point. Typically, the best location to place your Inter-Building Access
Point at your site is the center of your wireless coverage area. Try to place your mobile
stations within the line of sight. Obstructions may impede performance of the Inter-
Building Access Point.
n Connect the Ethernet Cable
The 11Mbps Wireless LAN Inter-Building Access Point supports 10/100M Ethernet
connection. Attach your UTP Ethernet cable to the RJ-45 connector on the Inter-Building
Access Point. Then connect the other end of the RJ-45 cable to a hub or a station. Please
note that, use the cross-over cable when you desire to connect the Access Point to a PC.
n Connect the Power Cable
Connect the power adapter to the power socket on the Inter-Building Access Point, and
plug the other end of the power into an electrical outlet. The Inter-Building Access Point
will be powered on and all five indicators on the top panel will flash in sequence to test
the functionality of the indicators.
NOTE: ONL Y use the power adapter supplied with the Inter -Building Access Point .
Otherwise, the product may be damaged.