background image

150Mbps Wireless-N Broadband Router

 Quick Installation Guide 

 10

holding WPS button on router briefly – may also be utilized 

Method 2: PIN 

—

 

Select this router for connection in your OS network connections or wireless adapter 

software settings 

—

 

Choose to enter the WPS PIN of the router and provide default router WPS PIN 

printed on label on bottom of router.    This PIN may be changed though, and you may 

do so/confirm current PIN in the router's user interface – click ‘Wireless 

Management’- ‘AP Setup’ - ‘WPS’ and you will be able to see the AP PIN as well as 

generate a new one and save it 

—

 

Alternatively, you may choose to utilize a WPS PIN provided by your wireless 

adapter and enter it in the router in the same part of the user interface - click 

‘Wireless Management’- ‘AP Setup’ - ‘WPS’ and enter adapter PIN for ‘Wireless 

Host PIN Code’. 

7.2.5.

 

WDS (Wireless Distribution System) 

If you are using this router to spread the wireless coverage of another router, or to spread the 

coverage to another router,  you can use WDS. For this example, WDS will be established 

between a router that the MAC address is 00-22-4f-cc-ae-f5 (R1) and another router that the 

MAC address is 00-22-4f-bc-af-5d (R2). The MAC address is printed on a label on the bottom 

of the router, or may be seem both netis routers. Please follow the steps  below,  but  keep  in 

mind that if one router in this setup is not netis you should first confirm it is capable of WDS 

and its interface menu may be considerably different: 

R1

¾

 

It should first be established that routers function normally as a routers not in a network 

involving WDS, and R1 (the router connected to a modem) should be configured below from a 

starting point where it was individually functional. 

¾

 

Click on ‘Wireless Management’- ‘AP Setup’- ‘Security’ and select and save None as 

authentication type 

¾

 

Click on ‘Wireless Management’- ‘AP Setup’-    ‘Basic’ and select and save radio mode as 

WDS or AP + WDS 

¾

 

Click on ‘Wireless Management’- ‘AP Setup’- ‘Security’ and select and save None as 

WDS authentication type or select a WDS security type, enter key and save.    Note that some 

other brands of router may not have the option of or be compatible in WDS wireless security. 

For key parameters, please refer to 

Wireless security settings

 

Содержание WF-2402















Отзывы: