Installation Guide
Wireless HD Video and Gaming Adapter
(WNCE4004)
Installation with WPS
Step 2:
Wait until the Link LED on the
button
WPS
Step 3:
Push the WPS button on your router. When the
Step 1:
Connect the WNCE4004
wireless connection has been established, the
Link LED changes color to indicate the quality of the
connection—solid green, solid amber, or solid red.
See
Link LED Activity
on the reverse side of
this document for more information about what these
colors mean.
to your TV, Xbox, or Blu-ray
player with the Ethernet
cable (included) and the
power adapter.
WNCE4004 blinks green. Press
the
WPS
button on the
WNCE4004. The WPS LED
blinks blue to show that the WPS
is running.
Step 4:
Congratulations! Your installation is complete.
What is WPS?
If you have a NETGEAR router, this feature is called Push 'N' Connect. Look for the
or
symbols on the router to make sure that the
NETGEAR router supports WPS. For non-NETGEAR routers, refer to the user manual to determine if the router supports WPS.
Once you know whether your router supports WPS, choose the appropriate installation method.
WPS (Wi-Fi Protected Setup) is a simple and secured way to connect a device to an existing network.
Installation without WPS
Step 1:
On the computer you will use to install the WNCE4004, disconnect
its wireless connection to the router and/or remove any Ethernet cable
currently connected to the computer. You can restore the connection
after the WNCE4004 installation is complete.
Step 2
:
Connect the WNCE4004 to your computer, using the Ethernet
cable (included) and the power adapter.
Step 3:
Wait until the Link LED blinks green. Make sure that the computer
gets the IP address. Then, open your Internet browser—it
automatically takes you to the setup page. (If not, manually type
http://www.mywifiext.net
as the browser address.) The default
user name is
admin
and the default password is
password
.
Follow the instructions on the setup page, then return to this guide
and continue to Step 4.
Step 4:
Disconnect the Ethernet cable from your computer.
Step 5:
Connect the WNCE4004 to your TV, xBox, or Blu-ray player.
Step 6:
Congratulations! Your installation is complete.
button
WPS
NOTE
: Make sure that you go through the connection settings on your TV, Xbox, or Blu-ray player after the WNCE4004
is configured and connected. If asked for the type of connection, make sure that Wired is selected.
Link LED
Ethernet
ports
button
WPS
Power
jack
Ethernet cable
Power
adapter
WNCE4004
LED
WPS
