NETGEAR WGR614v8 - 54 Mbps Wireless Router, Справочное руководство

Страница: 33 / 88

54 Mbps Wireless Router WGR614v8 Reference Manual
Internet and Wireless Settings 2-11
v1.0, July 2007
• None : No data encryption
• WEP (Wired Equivalent Privacy) : Uses WEP 64 or 128 bit data encryption. If selected,
enter the following information.
– Authentication Type: From the pull-down menu, select Automatic (the default),
Open System or Shared Key. Check your wireless card’s documentation to see what
method to use.
– Encryption Strength : From the pull-down menu, select either 64-bit (sometimes
called 40-bit) encryption or 128-bit encryption.
– Automatic Key Generation (Passphrase) : You can manually or automatically
program the four data encryption keys. These values must be identical on all PCs and
Access Points in your network. Enter a word or group of printable characters in the
Passphrase box and click the Generate button to automatically configure the WEP
Key(s). If encryption strength is set to 64 bit, then each of the four key boxes will
automatically be populated with 10 hexadecimal digits for the key values. If
encryption strength is set to 128 bit, then 26 hexadecimal digits will be selected for the
key values. Check the radio box for the key that will be used.
• WPA-PSK [TKIP] – Wi-Fi Protected Access with Pre-Shared Key; use WPA-PSK
standard encryption with TKIP encryption type by entering a group of printable characters
in the Passphrase box. The Passphrase must be 8 to 63 characters
.
• WPA2-PSK [AES] – Wi-Fi Protected Access version 2 with Pre-Shared Key; use WPA2-
PSK standard encryption with the AES encryption type by entering a group of printable
characters in the Passphrase box. The Passphrase must be 8 to 63 characters.
• WPA-PSK [TKIP] + WPA2-PSK [AES] – Allows clients access using either WPA-PSK
[TKIP] or WPA2-PSK [AES].
Accessing the Router After Installation
You can access the router after installation to modify or change any settings. To access the router
after setup:
1. In your browser window, enter http://www.routerlogin.net or 192.168.1.1.
2. When the log in screen appears, enter the default user name admin and password password,
or whatever user name and password you selected when you initially set up your router. Click
Apply.