NETGEAR WG102 - ProSafe Wireless Access Point, Справочное руководство

Страница: 46 / 80

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
3-22
v1.0, November 2005
e. Click Apply to save your settings.
Entering WEP Data Encryption Keys
You can manually or automatically program the four data encryption keys. These values must be
identical on all PCs and Access Points in your network.
• Automatic: Enter a word or group of printable characters in the Passphrase box and click the
Generate button. The four key boxes will be automatically populated with key values.
• Manual: Enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F).
Select which of the four keys will be the default.
See http://documentation.netgear.com/reference/enu/wireless/index.htm for a full explanation of
each of these options, as defined by the IEEE 802.11 wireless communication standard.
Note: WEP can be used with Open System or Shared Key. Choose the
encryption strength, and then enter the Keys as explained in “Entering
WEP Data Encryption Keys” on page 3-22
Note: If you use a wireless computer to configure WEP settings, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to
match the new settings or access the wireless access point from a wired
computer to make any further changes.