manualshive.com logo in svg

NETGEAR WG102 - ProSafe Wireless Access Point, Справочное руководство

Поделиться
Скачать
NETGEAR WG102 - ProSafe Wireless Access Point Скачать руководство пользователя страница 44

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102

3-20

v1.0, November 2005

Configuring the Radius Server Settings

You can view or change the Radius Server Settings from the Security menu. Follow the steps 
below:

•

Port Number.

 Port number of the Radius Server. The default is 1812.

•

Shared Secret.

 This is shared between the Wireless Access Point and the Radius Server while 

authenticating the supplicant. 

•

Re-authentication Time.

 The time interval in seconds after which the supplicant will be 

authenticated again with the Radius Server. The default is 3600 seconds.

•

Global-key Re-Key Time.

 Check on this option to enable Re-keying of Global Key. The 

Global Key Re-Key can be done based on time interval in seconds or number of packets 
exchanged using the global key. The default is 3600 seconds.

•

Update if any station disassociates.

 Check on this option to refresh global key when any 

stations disassociated with wireless Access Point. 

1. Connect to the WG102.

In address field of your Web browser, enter the 
default LAN address of 

http://192.168.0.229

.

 Log 

in with the user name of 

admin

 and default 

password of 

password

, or using the LAN address 

and password that you set up.

2. In the Security menu, click Radius Server Settings.

3. Enter the settings, and click 

Apply

.

The Radius Server Settings are explained below:

•

Authentication/Access Control Radius Server 
Configuration. 

This configuration is required for 

authentication using Radius. IP Address, Port No. 
and Shared Secret is required for communication 
with Radius Server. A Secondary Radius Server can 
be configured which is used on failure on Primary 
Radius Server 

•

IP Address.

 The IP address of the Radius Server. 

The default is 0.0.0.0.

Figure 3-10

Содержание WG102 - ProSafe Wireless Access Point

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды