NETGEAR WG102 - ProSafe Wireless Access Point, Справочное руководство

Страница: 40 / 80

Reference Manual for the NETGEAR ProSafe 802.11g Wireless Access Point WG102
3-16
v1.0, November 2005
You can configure the WG102 to use the types of network authentication shown in the table below.
Data Encryption
Select the data encryption that you want to use. The available options depend on the Network
Authentication setting above (otherwise, the default is None). The Data Encryption settings are
explained in the table below:
Network Authentication Types
Open System Can be used with WEP encryption, or no encryption.
Shared Key WEP must be used. At least one shared key must be entered.
Legacy 802.1x: You must configure the Radius Server Settings to use this option.
WPA-PSK You must use TKIP encryption, and enter the WPA passphrase
(Network key).
WPA with Radius You must configure the Radius Server Settings to use this option.
WPA2-PSK WPA2 is a later version of WPA. Only select this if all clients support
WPA2. If selected, you must use AES encryption, and enter the WPA
passphrase (Network key).
WPA-PSK and
WPA2-PSK This selection allows clients to use either WPA (with TKIP) or WPA2
(with AES). If selected, encryption must be TKIP + AES. The WPA
passphrase (Network key) must also be entered.
WPA2 with Radius WPA2 is a later version of WPA. Only select this if all clients support
WPA2. If selected, you must use AES encryption, and configure the
Radius Server Settings Screen.
WPA and WPA2 with
Radius This selection allows clients to use either WPA (with TKIP) or WPA2
(with AES). If selected, encryption must be TKIP + AES, and you must
also configure the Radius Server Settings Screen
Data Encryption Settings
None No encryption is used.
64 bits WEP Standard WEP encryption, using 40/64 bit encryption.
128 bits WEP Standard WEP encryption, using 104/128 bit encryption.
152 bits WEP Proprietary mode that will only work with other wireless devices that
support this mode.
TKIP This is the standard encryption method used with WPA.