Appendix: Converting WG102 and WAG102 to WFS709TP compatible
firmware
If you have existing WG102 or WAG102 access points, you can load a Lightweight Firmware image to
make them compatible with the WFS709TP. Please note that this process is not reversible and will make
the Access Points unusable without a WFS709TP controller.
The links to the images are the following:
(Please make sure you download the firmware relevant to the correct relevant geographic zone
configured on the WFS709TP controller)
WG102 to WGL102:
http://kbserver.netgear.com/release_notes/d103134.asp
WAG102 to WAGL102:
http://kbserver.netgear.com/release_notes/d103135.asp
