NETGEAR WAG302 - ProSafe Dual Band Wireless Access Point, Справочное руководство

Страница: 36 / 104

NETGEAR ProSafe Dual Band Wireless Access Point WAG302v2 Reference Manual
2-14 Basic Installation and Configuration
v1.0, May 2006
Use the following steps to configure a Security Profile.
1. Connect to the WAG302v2.
In the address field of your Web browser, enter the default LAN address of
http://192.168.0.230 . Log in with the user name of admin and default password of password ,
or log in by using the LAN address and password that you configured.
2. In the Security menu, click Security Profile Settings.
The Security Profile Settings page appears and displays the current settings for the eight
Security Profiles.
3. Select the Security Profile to configure and click Edit . The Security Profile Configuration
page appears, as shown below in Figure 2-7 .
4. Enter the settings for the Security Profile, which are described on the following page.
5. To update the settings, click Apply .
After the configuration changes are applied, the main Security Profile page displays.
6. If the Security Profile you configured is not already enabled, click the Enable check box
associated with the Security Profile, and then click
Apply .
By default, only the first Security Profile (default name: NETGEAR) is enabled. To disable
this Security Profile, you must disable the radio on the Wireless Settings page.
Note: If you are using a RADIUS Server, configure the RADIUS settings first, as
described in “Configuring the RADIUS Server Settings” on page 2-20 .
Note: If you use a wireless computer to configure Security Profile settings, and if
your computer uses the Security Profile that you change, you will be
disconnected when you click Apply. Reconfigure your wireless adapter to
match the new settings or access the wireless access point from a wired
computer to make any further changes.