The Dashboard page displays.
4.
Click the Main Menu icon and select Base Station Settings > Logs.
The Logs page displays.
5.
Click the DOWNLOAD button.
6.
Save the file to your computer.
The method to save the file depends on the browser that you use. The name of the file is
logs.tar.gz
.
7.
Click the Close icon.
The Dashboard page displays.
Update the Firmware
By default, the base station automatically checks for new firmware. If it detects new firmware, an update
button and the firmware version are displayed so that you can select to install the new firmware. If you want,
you can disable the automatic firmware check.
You can also check for new firmware through the local browser interface and install the firmware or you can
manually download new firmware from the NETGEAR website and install the firmware.
The base station firmware and the camera firmware are bundled together. A firmware
update is for both devices.
Note
Check for and Install New Firmware
You can check for new firmware through the local browser interface and install the firmware.
To check for and install new firmware:
1.
Open a web browser from a computer or mobile device that is connected to the same LAN as the base
station.
If you are unable to connect to the same LAN using WiFi, use an Ethernet cable to connect a computer
to the same router or switch as the base station.
2.
Enter the domain name or IP address of the base station.
If you do not know the domain name or IP address, see
Access the Base Station for the First Time
on
page 16.
A login window opens.
3.
Enter the base station password.
The password is the one that you specified the first time that you logged in. The password is
case-sensitive.
The Dashboard page displays.
4.
Click the Main Menu icon and select Base Station Settings > Device Info > Firmware Update.
Manage Base Station Settings
35
FlexPower ONVIF Wire-Free IP Camera and Base Station User Manual
