NETGEAR RH328, Справочное руководство

Страница: 53 / 142

Reference Guide for the Model RT328 and Model RH348 ISDN Routers
Router Configuration 3-9
Table 3-4 lists and describes the fields and field descriptions for Menu 2 - ISDN Setup.
Table 3-4. ISDN Setup Field Descriptions
Field Description
Switch Type This field is fixed as DSS1.
B Channel Usage Switch/switch should be selected unless one or both B channels are a leased circuit.
Toggling this parameter using the Space bar will cycle through all combinations of
Switch, Leased, and Unused.
ISDN Data and
Subaddress Enter the telephone number and subaddress assigned to the ISDN data call for the
router. It is used as the outgoing CGPN (Calling Party Number) setting for the ISDN
data call. The router accepts only digits. Do not include dashes ( - ) and spaces in
this field. This field should be no longer than 19 digits for the number and 5 digits for
the subaddress.
A/B Adapter 1
and Subaddress Enter the telephone number and subaddress assigned to the A/B Adapter 1 (POTS
port 1) call for the router. It is used as the outgoing CGPN (Calling Party Number)
setting for the A/B Adapter 1 call.
A/B Adapter 2
and Subaddress Enter the telephone number and subaddress assigned to the A/B Adapter 2 (POTS
port 2) call for the router. It is used as the outgoing CGPN (Calling Party Number)
setting for the A/B Adapter 2 call.
Dial Prefix to Access
Outside Line Enter the prefix number if the router is connected to an ISDN PABX. This number is
added to all outgoing calls and should be no longer than 4 digits. If the router is not
connected to an ISDN PABX, leave this field blank.
PABX Number (with
S/T Bus Number) Enter the S/T bus number if the router is connected to an ISDN PABX. If this field is
left blank, the loopback test is skipped.
Incoming Phone
Number Matching There are three options in this field:
• Multiple Subscriber Number (MSN): The digital call is answered only when there is
a match for the ISDN data number. The analog call is answered as the A/B Adapter
1 call when there is a match for the A/B Adapter 1 number. It is answered as the
A/B Adapter 2 call when there is a match for the A/B Adapter 2 number. If an A/B
Adapter 1 or 2 number is not specified, the analog call is not answered.
• Called Party Sub-Address (CDSA): The digital call is answered when there is a
match for the ISDN Data subaddress. The analog call is answered as the A/B
Adapter 1 call when there is a match for the A/B Adapter 1 subaddress. The analog
call is answered as the A/B Adapter 2 call when there is a match for the A/B
Adapter 2 subaddress. If an A/B Adapter 1 or 2 subaddress is not specified, the
analog call is not answered.
• Don’t care - all numbers accepted: All digital calls, including global calls (without
CDPN and CDSA in the call setup) to any CDPN (Called Party Number) are
answered. All analog calls are routed to either the A/B Adapter 1 or A/B Adapter 2,
or they are not answered. Answering analog calls depends on the setting of Analog
Call Routing. All global analog calls either accept the numbers or do not answer
them depending on the setting of Global Analog Call.
Config.fm Page 9 Tuesday, October 10, 2000 3:17 PM