2
Installation
Use the rack-mount hardware included with your ReadyNAS storage system to install it in a rack. Read
Rack-Mount Precautions
on page 33.
A system with installed drives can weigh more than 80 pounds. To avoid injury or damage
to the equipment, perform the rack-mount installation with appropriate assistance.
Note
Read these instructions in their entirety before you begin. Locate the shipping carton, remove the rack-mounting
kit, and prepare to work with it.
The rack-mounting kit contains two rail assemblies. Each assembly consists of two sections:
•
An inner fixed chassis rail that secures directly to the system’s chassis
•
An outer fixed rack rail that secures directly to the rack itself
To install the system into a rack:
1.
Extend the rail assembly by pulling it outward.
2.
Press the release tab and separate the inner rail from the outer assembly.
Getting Started
8
ReadyNAS OS 6
