16
|
Chapter 2: Diagnostics and Maintenance
ReadyNAS 3100 Hardware Manual
Control Panel Diagnostics and Status Information
The control panel for the ReadyNAS 3100 is located on the top right corner of the unit. Each
function on the control panel is described in the following table.
Item
Activity
Description
Power
button
Push the
button
Push to turn on the ReadyNAS 3100.The power LED blinks while
the ReadyNAS 3100 is booting.
Preferred shutdown
: If the unit is running, pressing the power
switch once will begin the graceful shutdown blink pattern on the
LEDs. Pressing the power button a second time within 5 seconds
confirms and initiates the graceful shutdown.
Forced shutdown
: If the unit is hung, you can press and hold the
power button for 5 seconds to force shutdown.
System
Reset
Push the
button
Reset
: Press the reset button once to warm boot the ReadyNAS
3100.
Diagnostics
: To enter the diagnostic boot menu, see
“Understanding the System Diagnostics Boot Menu”
on page 19.
Power LED
On (Green)
Off
Green
: the unit is powered on.
Red
: Power failure.
Off
: the unit is powered off.
Disk LED on
the control
panel
On/Blink
(Amber)
Blinking amber
: disk activity.
Control panel
System
overheat/
fan failure
Disk
activity
Power
button
Power
LED
Reset
button
NIC 2 / NIC 1
LED
