NETGEAR PS121v2 - USB Mini Print Server Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 50

NETGEAR PS121v2 - USB Mini Print Server Скачать руководство пользователя страница 13

NETGEAR USB Multifunction Printer Server PS121v2 User Manual

Introduction

1-3

v1.1, September 2006

3. USB cable

4.

Resource CD

, including:

–

Driver and System Utility Software

–

NETGEAR USB MultiFunction Printer Server PS121v2 Installation Guide

5. Warranty & Registration card

6. Support information card

If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.

To qualify for product updates and product warranty registrations, fill out the registration
information within 30 days of purchase. For priority service, register online on the NETGEAR
Web page at:

http://www.NETGEAR.com

You can also fill out and return the Warranty & Registration Card that is included in your product
package.

Hardware Description

The PS121v2 USB Multifunction Print Server LEDs indicate the status of the server and the
Ethernet traffic. It has one 10/100 Mbps network port. The port operates in 10/100 Mbps when
connected to a 10/100Mbps Ethernet network. It has one USB port. It has a power adapter
receptacle that accepts a 12V 1A DC power adapter. It has a diagnostic/reset button.

«
...
11
12
13
14
15
...
»

Содержание PS121v2 - USB Mini Print Server



















































Отзывы:

Нет отзывов