Use VLANS for Traffic Segmentation
53
ProSAFE Gigabit Web Managed (Plus) Switches
WARNING:
Do not remove all ports from PVID 1, which is the management PVID.
If you remove all ports from PVID 1, you cannot access the switch for
management. In such a situation, to recover access to the switch,
you must reset the switch to its factory defaults settings.
9.
Click the
Apply
button.
Your settings are saved.
Use the ProSAFE Plus Utility to Assign a PVID to Ports
To assign a PVID to one or more ports:
1.
Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.
4.
Click the
APPLY
button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Status page displays.
6.
Select
VLAN > 802.1Q > Advanced > PVID
.
You can select
Port PVID
only if you already enabled the advanced 802.1Q VLAN option