Use VLANS for Traffic Segmentation
39
ProSAFE Gigabit Web Managed (Plus) Switches
2.
Double-click the
ProSAFE Plus Utility
icon.
The Switch Selection page displays a list of Web Managed (Plus) switches that it
discovers on the local network.
3.
Select the switch.
If you do not see the switch, click the
REFRESH
button.
4.
Click the
APPLY
button.
You are asked to enter the password for the switch.
5.
Enter the switch’s password in the
password
field.
The switch’s default password is
password
.
The Switch Status page displays.
6.
Select
VLAN
.
The Basic Port-Based VLAN page displays.
7.
If this is the first time that you are accessing the Basic Port-based VLAN Status page or if
you are changing the VLAN assignment method, select the
Enable
radio button and
.
A pop-up window opens, informing you that the current VLAN settings will be lost.
8.
Click the
Yes
button.
The pop-up window closes and the Basic Port-based VLAN Group table displays.
The previous figure is an example. Your switch might provide more or less ports.
9.
Under each port to be added to a VLAN, enter the VLAN ID of the VLAN.
You can enter a VLAN ID from 1 to the maximum number of ports that your switch
supports. If all the VLANs share an uplink to the Internet or servers, enter
all
in the
VLAN
ID
field for the port that you want to use for the uplink.
Note:
If ports are members of the same LAG, you must assign them to the same
VLAN.
10.
Click the
APPLY
button.
Your settings are saved.
