ProSafe 7000 Managed Switch Software Administration Manual, Release 8.0.3
Port Routing
3-9
v1.0, June 2010
2.
Select
Static
in the
Route Type
field.
3.
Enter
Network Address
field. Noted this field is expecting a network IP address, not a host IP address.
Do not put down something like “10,100.100.1”. The last number should always be zero.
4.
Enter
Subnet Mask
that matches the subnet range desired.
5.
The Preference
field is optional. A value of one will be chosen if nothing is entered.
6.
Click the
Add
button on the bottom of this page. The web page will be updated with static route shown
in the route table.
7.
To remove the route entry, either static or default, simply check the box on the left hand side of the
entry, and click the
Delete
button on the bottom of the page.
